Liso P1

Liso chipboard is a standard solution for general applications in dry environments.

This board is suitable for use in service class 1 (limited temperature and relative humidity), and can only be used in biological hazard class 1 of EN Standard 335-3.

Liso is available with both a sanded surface and a TopFinish surface. The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, which is easy to clean. This means that boards with a TopFinish surface are particularly suitable for building applications such as concrete formwork.

A fine, sanded surface (SA) is recommended if the Liso board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications.

Liso chipboard with a sanded surface can be finished with melamine, finishing foil, lacquer, veneer and laminate.

These boards are a robust solution for non-load bearing applications including packaging and interior fittings.

With a TopFinish surface, Liso can also be used as single use formwork.

Finishes:

Sanded

A fine, sanded surface (SA) is recommended if the board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications.

TopFinish

The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, and it is easy to clean. The increased concentration of natural paraffin in the surface increases its moisture resistance. Our boards with a TopFinish surface also score highly for air tightness. These advantages mean that boards with a TopFinish surface are particularly suitable for building applications.